Maintenance and set up for Cross-Enduro

Home » Maintenance and set up for Cross-Enduro
The damping characteristics of the cross-enduro motorbikes vary with the usage. Main issue affecting the performance is the wear of the internal components as seals, o-rings and friction guides. The hydraulic oil also suffers wear and loses performance.

To keep your suspension always with the best performance a regular maintenance is needed.

As a regular basis the oil should be replaced every 6 months if the motorbike is used frequently. Seals and o-rings can last one complete season if the system has good quality.

At least once per season we recommend to carry out a complete maintenance service.

You can choose between different levels of maintenance and suspension tuning :

Basic Maintenance:

  1. Checking the initial state of the damper-fork in the dynamometer
  2. Disassembly and inspection of all parts
  3. Control of bushes and rods (replacement if needed)
  4. Ultrasonic bath cleaning of the valves
  5. Replacement of seals and gaskets
  6. Oil Change
  7. Adjust Nitrogen preload when needed
  8. Final check on dynamometer of the entire range of settings

Price : 150€

 

PRO Maintenance-Tuning:

  1. Checking the initial state of the damper-fork in the dynamometer
  2. Disassembly and inspection of all parts
  3. Control of friction guides and rods
  4. Ultrasonic bath cleaning of the valves
  5. Replacement of seals and gaskets
  6. Replacement of friction bushes – low friction ones
    7. Adjustment/modification of the valves and oil viscosity according to the rider’s weight and category : moto-cross, endure, super-motard.
    8. Spring replacement and/or height modification
  7. Adjust Nitrogen preload when needed
  8. Final check on dynamometer of the entire range of settings

Price : 300€.

For any doubts or enquiries please contact us.